For questions before or after the sale email us with your contact info
To order by phone 1-810-744-1488
|
Copyright © 2006-2010 Hypermegasat.com. All Rights
Reserved.
|
|
Please contact us with any questions you may have. All emails will be replied to within 48 hours! Customer satisfaction is our #1 priority.
|
 |
|
Features:
*Communication protocol DiSEqC
1.2/1.3 Level *Diameter of support pole (35 to 68)mm *Dish support length 145 mm
*Dish support diameter 42 mm (50 mm available) *Rotation speed 2.4/s(18V) 1.5/s(13V) *Operating power supply 13/18 V DC *Consumption in stand-by mode 40 mA *Consumption in operating mode 180 mA *Starting movement consumption (Max.) 350 mA *Programmable position ( DiSEqC 1.2) 49 satellites *Preset positions (DiSEqC 1.2) 28 satellites *Connectors F type *Mechanical limits 72 *Programmable electrical limits from 5 to 6 |
| Protocol: | DiSEqC 1.2 |
| Compatible Receiver: | DiSEqC 1.2 Receiver |
| Antenna Size: | 120cm Max. |
| Speed: |
1.9°/Sec at 13VDC 2.5°/Sec at 18VDC |
| Azimuth Angle: | 75° East ~ 75° West - 150° Max. |
| Elevation Angle: | 10°~90° |
| Tube for Antenna: | 45 x 160L mm |
| Diameter of Mast: | 35 ~ 65mm |
| Input Voltage: | 13/18 V DC |
| Output Voltage: | 13/18 V DC depending on Input |
| Power Consumption: |
40mA in Standby 200mA in normal use 350mA Max |
| Satellite Positions: | 60 positions |
| Go to 0 Function: | Yes (Go to 0°) |
| Recalculation Function: | Yes |
| Go to X Function: | Yes |
| Manual Control Button: | Yes (East/West) |
| LED Indicator: | Yes (2 color) |
| Limit Protection: | Programmable Software Limits |
| Positioning Sensor: | High Resolution Hall Effect Sensor |
|
LED Map:
|
|
Specifications:
|
| Color | Status | Indication |
| Green | ON | Power on, Standby Mode |
| Orange | Blink | Receiving DiSEqC 1.2 Commands/Reset Mode |
| Orange | ON | Error Message: Over Current/Reach Hardware Limits |
|
Reset
Instructions:
Make sure the power from the receiver is turned on. The indicator LED light should be on. Drive the motor to 0° using the manual buttons Probe the RESET button on the bottom of the motor using a paper clip or other small tool for 2 seconds. The LED will blink Orange. The reset process is complete when the LED turns Green. The preset satellite table is now re-installed and the current position will be set as 0°. Power off the motor but unplugging the receiver. |
|
Includes:
SG6000 Motor Box Manual Brackets and all items needed to mount |
|
The
SG6000 heavy duty satellite dish motor is the latest model.
Expand your Free To Air System to get the maximum amount of
channels. Heavy duty construction under strict
engineering standards delivers you a motor you can count on with
all the latest features. 1 year
manufacturer's warranty.
|
|
$77.99 Free Shipping!
|
SG6000 Heavy Duty DiSEqC Dish Motor
