For questions before or after the sale email us with your contact info
To order by phone 1-810-744-1488
|
Copyright © 2006-2010 Hypermegasat.com. All Rights
Reserved.
|
|
Please contact us with any questions you may have. All emails will be replied to within 48 hours! Customer satisfaction is our #1 priority.
|
 |
|
Features:
*Works
for all FTA Dishes with a 42mm tube (50 mm available at an extra
cost) *STAB Compliant/USALS *Powers a dish up to 1.2 meters or 47 inches
*Only
One Coaxial Cable Control *High Efficiency *Compact Structure *Ultra Low Noise *Adjustable Hardware Limits *Easy Installation with LED Indicator *Manual EAST / WEST button |
|
LED Map:
|
|
Specifications:
|
| Color | Status | Indication |
| Green | ON | Power on, Standby Mode |
| Orange | Blink | Receiving DiSEqC 1.2 Commands/Reset Mode |
| Orange | ON | Error Message: Over Current/Reach Hardware Limits |
|
Reset
Instructions:
Make sure the power from the receiver is turned on. The indicator LED light should be on. Drive the motor to 0° using the manual buttons Probe the RESET button on the bottom of the motor using a paper clip or other small tool for 2 seconds. The LED will blink Orange. The reset process is complete when the LED turns Green. The preset satellite table is now re-installed and the current position will be set as 0°. Power off the motor but unplugging the receiver. |
|
Includes:
SG2100 Motor Box Manual Brackets and all items needed to mount |
|
This is the original Moteck Digipower,
don't accept cheap imitations! SG2100 Model 120 HH Type Mount,
DiSEqC Dish Motor. Move your dish for maximum channels! This is
simply the best motor out there! High quality, with all the
features like one coaxial cable control, go to X function,
adjustable hardware limits, LED indicator, and more. Fits all
popular Dish's with a 42 mm tube. Works for all Receivers with
DiSEqc 1.2 protocol. 1 Year Warranty.
|
|
Now $67.49 Free Shipping
|
|
Was $72.59
|
SG2100 DiSEqC Dish Motor
| Model | SG2100 | ||||||||||||
| Antenna Diameter | 1.2M Max. | ||||||||||||
| Azimuth Angle | 70˚EAST ~ 70˚WEST ( 140˚ ) Adjustable | ||||||||||||
| Elevation Angle | 25˚~75˚ | ||||||||||||
| Input / Output Voltage | 13 / 18 VDC | ||||||||||||
| Power Consumption |
50 mA (Standby mode) 200 mA (Normal) 350 mA (Max.) |
||||||||||||
| Rotation Speed | 1.9˚ / sec ( at 13V) ; 2.5 ˚/ sec ( at 18V) | ||||||||||||
| Satellite Positions | 60 | ||||||||||||
| Connector | F Type | ||||||||||||
| Command Protocol | DiSEqC 1.2 | ||||||||||||
| Resynchronize Function | YES | ||||||||||||
| Goto Position 0 Function | YES | ||||||||||||
| Goto X Function | YES | ||||||||||||
| Positioning Sensor | High Resolution Hall Effect Sensor | ||||||||||||
| EAST / WEST Limit | Adjustable Hardware and Programmable Software | ||||||||||||
| Manual Button | EAST / WEST | ||||||||||||
| Indicating LED |
YES
|
||||||||||||
| Tube size for antenna | 55x160mm | ||||||||||||
| Stand size | 35~65mm | ||||||||||||
