For questions before or after the sale email us with your contact info

To order by phone 1-810-744-1488

How to Use

• Enables the user to select one LNB signal between 4 different LNBs of any type. DiSEqC 1.0, 1.1, 1.2, 2.0 compatible
• 4 input ports marked LNB1, LNB2, LNB3, LNB4 are connected to the 4 LNBs, which may be on 4 different dishes
• Output marked RECEIVER OUT is connected to the receiver
• Frequency 950 to 2400 MHz, Insertion Loss <3dB
• Works with all FTA Receivers

• Designed for a Dish 500 system to automatically switch between 2 feeds like 110/119
• Works for Dish 500 dish's or two separate dish's with one feed each
• Works for all DishNetwork, Bell, ExpressVu receivers with Dish 500 dish's
• Works for the better FTA receivers that support SW21

• Connect a Dual Output LNB & an off air antenna or cable and output to up to 4 FTA receivers
• All receivers are able to choose any channel on any polarity at any time
• Requires using a twin (dual) LNBF to provide both vertical & horizontal to the switch
• Perfect if you have one dish & want to run 4 receivers in 4 different rooms
• Works with all FTA receivers & all LNB types except DishPro LNBs

• For severe climates where you need extra rain & snow protection
• DiSEqC 2.0 bi-directional support
• Backward compatible with other DiSEqC protocols
• 950 to 2400 MHz frequency range, insertion loss of less than 2dB
• Use to select one LNB automatically between 4 different LNBs of any type from any FTA receiver that supports DiSEqC commands

• Brand New on the market, only at HyperMegaSat.com!
• Connect up to 4 LNBs to one FTA receiver
!
• Frequency Range 950-2150 MHz
• 1.5 dB Insertion Loss, 30 dB Isolation
• Passing Current 500mA Max
• Works with any satellites and all FTA receivers