For questions before or
after the sale email us with your contact info
To order by phone
Copyright © 2006-2019 HyperMegaSat.com. All Rights Reserved.
Please contact us with any questions
you may have. All emails will be replied to within 48 hours!
Customer satisfaction is our #1 priority.
PO Box 101 Davison, MI 48423
Shipping & Returns Information
Click to follow us on Twitter
Get the answers in our forum!
What is Free To Air?
Channel Lists & Satellite Charts
For all FTA
Dishes up to 120cm (48 Inch) that use a 55mm diameter tube
For all FTA Receivers that support DiSEqC 1.2, or DiSEqC 1.3 (USALS)
Powered by your FTA Receiver using the coax cable to the LNB
No external power source required
Ultra Low Noise
Protocol DiSEqC1.2, USALS
Antenna Maximum Diameter 120 cm (48")
Maximum Antenna Weight 17 kg
Support Pole Diameter 50 ÷ 83 mm
Antenna support length 180 mm
Antenna support diameter 54 mm
Rotation Angle ± 62°
Rotation Speed 0.7°/s (18 V); 0.4°/s (13 V)
Work Voltage 13 / 18 Vdc
Stand-by Consumption 30 mA
Work Absorption 190 mA
Max Consumption 350 mA
Operating Temperature -40°C ÷ +80°C
Max Relative Humidity 100%
Settable Positions (DiSEqC1.2) 49 satellites
Preset Positions (DiSEqC1.2) 28 satellites
Settable Positions (USALS) without limits
Link coaxial cable
Mechanical Limits ± 70°
Settable Electronic Limits 5° ÷ 65°
Fine Rotation 0.1° impulses
Inclination on the pole 15° ÷ 70°
Weight 3200 g
STAB HH120 Motor
Brackets /Hardware to mount
Motors - Direct from Italy! Motorize your 120 cm (48
inch) Ku-Band dish and run
it with a FTA Receiver with DiSEqC 1.2 and USALS capabilities.
This Horizon-to-Horizon STAB Motor works off of the single coax
cable that is used to power the LNBF. This STAB Motor will let
you move your Ku-Band dish (Up to 120cm in size and Up to 37 lbs)
to different Satellites for MORE FREE TO AIR CHANNELS! These
trusted STAB brand motors are the best you can buy!
*Free Ship only in the 48 continental USA
on this item
STAB HH-120 DiSEqC USALS Dish Motor - Made in Italy