For questions before or after the sale email us with your contact info

To order by phone 1-810-744-1488

Copyright © 2006-2010 Hypermegasat.com. All Rights Reserved.
 

 

Please contact us with any questions you may have. All emails will be replied to within 48 hours! Customer satisfaction is our #1 priority.


Contact Us
Email sales@hypermegasat.com
PO Box 101  Davison, MI  48423
All Items are In Stock and READY TO SHIP!!
Solution Graphics
Shipping & Returns Information
Click to follow us on Twitter
Questions?
Get the answers in our forum!
What is Free To Air?
FTAList.com, The Guide to Free TV from Space
Channel Lists & Satellite Charts
 
 
 
 

Home    Receivers    Dishes/Motors    LNBs    Switches    Signal Meters    Accessories    Brackets    OTA    FAQ    Forums
Features:
 

     *SG9120 Fits dishes up to 1.2m
     *METAL GEAR
     *Smart-Fit design allows back bracket to mount snug.
     *Specially designed back bracket for use of motor in both Northern and Southern Hemisphere
     *Larger oversized mounting bracket helps with wind resistance
     *1-year manufacturers warranty
     *DiSEqC 1.2 Compatible
     *USALS Compatible
     *Everything controlled via 1 coaxial cable
     *Ultra low noise
     *Goto X function
     *LED Power Indicator
     *East/West movement button on motor
     *Degree indicator on shaft
     *Mostly steel gears except for shaft gear
     *Hardware Reset button to to allow you to easily reset the motor with a quick touch of a button 

Protocol: DiSEqC 1.2
Compatible Receiver: DiSEqC 1.2 Receiver
Antenna Size: 120cm Max.
Speed: 1.9°/Sec at 13VDC
2.5°/Sec at 18VDC
Azimuth Angle: 75° East ~ 75° West - 150° Max.
Elevation Angle: 10°~90°
Tube for Antenna: 55 x 160L mm
Diameter of Mast: 35 ~ 65mm
Input Voltage: 13/18 V DC
Output Voltage: 13/18 V DC depending on Input
Power Consumption: 40mA in Standby
200mA in normal use
350mA Max
Satellite Positions: 60 positions
Go to 0 Function: Yes (Go to 0°)
Recalculation Function: Yes
Go to X Function: Yes
Manual Control Button: Yes (East/West)
LED Indicator: Yes (2 color)
Limit Protection: Programmable Software Limits
Positioning Sensor: High Resolution Hall Effect Sensor
LED Map:
Specifications:
Color Status Indication
Green ON Power on, Standby Mode
Orange Blink Receiving DiSEqC 1.2 Commands/Reset Mode
Orange ON Error Message: Over Current/Reach Hardware Limits
 Reset Instructions:

    Make sure the power from the receiver is turned on. The indicator LED light should be on.
    Drive the motor to 0° using the manual buttons
    Probe the RESET button on the bottom of the motor using a paper clip or other small tool for 2 seconds.
    The  LED will blink Orange. The reset process is complete when the LED turns Green. The preset satellite
    table is now re-installed and the current position will be set as 0°. Power off the motor but unplugging the
    receiver.  
   
 Includes:

    SG9120 Motor
    Gift Box
    Manual
    Brackets and all items needed to mount
   
Steel Gears make this DiSEqC Motor truly Heavy Duty. The SG9120 is the latest & most durable & Heavy Duty DiSEqC Motor on the market! The motor includes 4 larger nuts and bolts that will mount onto the larger 50mm tube. The 50mm tube works excellent with almost any 120cm satellite dishes on the market and almost all 90cm satellite dishes similar to the WS9036 90cm, Hotdish 90, or any other with a U bolt. The metal gear inside will not deteriorate or grind due to heavy use.  1 year manufacturer's warranty.
$79.99 Free Shipping!

SG9120 Heavy Duty DiSEqC Dish Motor with Metal Gear & 50mm Tube  

DiSEqC 1.0/1.2