For questions before or after the sale email us with your contact info
To order by phone 1-810-744-1488
|
Copyright © 2006-2009 Hypermegasat.com. All Rights Reserved.
|

|
Please contact us with any questions you may have. All emails will be replied to within 48 hours! Customer satisfaction is our #1 priority.
|


|
Specifications:
|
Input Frequency Range: 950~2150MHz
Signal field intensity range: 30dBuV-105dBuV
Measurement Unit: dBmV; dBµV; dBm
Measurement Accuracy: ±1.5dB
Input Resistance: 75 ohm
Symbol Rate: 2Msps-45Msps
Connector: F type
Measurement type: signal strength; bit error rate; S/N
QPSK switch: automatic identification
22K control: supported
Audio-output: Speaker
Display: Code segment wide-temperature LCD
Memory content: 300 reserved locations for global satellite channels;
100 user-defined channels
LNB Power Supply: 13V, 18V, <500mA
Interface mode: USB
Adapter power supply: AC100V~240V
C input: DC12~23V
Output port voltage: DC12-23V
Battery working time: about 2.5 hours continuously after full charge,
varying from LNB with different power consumption.
Charging time: 4 to 6 hours.
Working Temperature: 0°C~40°C
Storage Temperature: -10°C~50°C
Exterior size: 142x82x35(mm)
Weight: 0.42Kg
Gross weight: 0.9 Kg
1 piece per gift box
|
Includes:
AC adapter 1 pc Car charger 1 pc RF connector 2 pcs USB cable 1 pc User manual 1 pc Li-ion battery 1 pc |
Uses the same type display screen as cell phones so it can be read in direct sunlight. Display screen has a switchable back light so your meter can be used in low light conditions.
FS1 has a Global Data Bank that holds all the satellites in a separate data bank. The meter also has a User Defined Data Bank that stores 100 satellites. The user can define new entries from the keypad.
Meter never needs to be returned for re-calibration due to the unique calibration system built in to the meter. Each time the meter boots up it automatically calibrates for optimum performance so you can align each install with confidence.
Rechargeable Li-on battery lasts
approximately 3.5 hours on a full charge. If the battery runs low during
use, you can loop the satellite receiver through the meter and power the
meter from the satellite receiver power supply.
|
Add to cart to see our LOW PRICE!
|
Special introductory price for a limited time only!
First Strike FS1 Digital Satellite Signal Meter

Preset Global Satellite
Data Bank
User Defined Satellite Data Bank
Wide, Clear, Easy to Read LCD
All Parameters show on one screen
Easy to Learn,
Easy Operation
Keypad Editing
Switchable Back Light
Internal Power Supply
Can be powered from the satellite receiver
Universal Charger, 120vac 60Hz / 220vac 50 Hz
12vdc Car Charger
True USB interface
Replaceable "F-81" connectors
Ruff Neck protective jacket

